Item Attribute of CZPTtronic Potting Silicon (HY-9055)
CZPTtronic Potting Silicon (HY-9055) is a variety of minimal viscosity, Inherent flame resistance, two elements addtion cured potting silicone with warmth-conducting. It cures with equally on room temperature and heated temperature. It has the function of the greater temperature the more rapidly of the curing time. It can be applied to digital components for insulation, waterproofing, fastened and flame retardant. It primarily used in digital components surface with materials of Personal computer(CZPT-carbonate)PPABSPVC, etc. And metal resources.
Common Application of CZPTtronic Potting Silicon (HY-9055)
CZPTtronic Potting Silicon (HY-9055) could be utilized to
– substantial run electronics,
– DC/DC module and circuit board which demands heat dissipation and high temperature resistance.
-It can be broadly utilized for LED monitor, Wind Electricity Generator, PCB substrate, and many others.
Complex XIHU (WEST LAKE) DIS.Lines of CZPTtronic Potting Silicon (HY-9055)
one, Pls place portion A and element B in independent container and stir evenly prior to mixing the two portion together.
2, Mixing Ratio: Component A: Part B = one: 1
three, Deaeration the combination in vacuum pump below .08 MPa for 3-5 minutes. Then the combination could be used for pouring.
4, Pls note that the thickness of the silicone affects the curing time. If the silicone employed is a little thick, then the curing time will be a small more time. The temperature also has an effect on the curing time. When in reduced temperature, we advise clients properly heat the combination to accelerate vulcanization. With temperature of eighty~one hundred, the silicone will treatment in 15 minutes Even though in 25 room temperature, the silicone will remedy all around 8 hrs.
|Ahead of Curing
|Viscosisty(soon after mixing)
|one hundred twenty
Soon after Curing