High Pressure Polymer Melt Gear Pump for Extrusion Line

High Pressure Polymer Melt Gear Pump for Extrusion Line

High force polymer soften gear pump for extrusion line
Extrusion melting pump soften gear pump for plastic sheet extruder
Extrusion melting pump soften gear pump for plastic sheet extruder
Higher Strain HDPE Extrusion machine  hot melt equipment pump

Extrusion soften pump melt gear pump for plastic sheet extruder
Very hot soften gear pump for plastic extrusion equipment

Substantial Stress HDPE Extrusion equipment  hot melt gear pump
CZPT pumps occur in a assortment of sorts and sizes to fit the requirements of your extrusion, compounding or polymer production approach.

Benifits of the metering pump melt equipment pump
1. Stabilizing the output pressure—the pressure on extruder can be reduced by 30%-fifty% after using melt pumps.
2. improving the product quality
3. increasing the extrusion output—reducing pressure on screw and chaning the building pressure from “screw to die” to “melt pump to die”, so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product’s quality and quantity.
four. prolonging the working life—the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable

Technica knowledge
one.Rotate speed: ≤60rpm(Adjustable)
2.Temperature: 400°C (max.) 
three.Max.Outlet pressure: 350Bar
4.Max.CZPTential pressure: 275Bar 
5.Heating method: CZPT Steel Cartridge Heater
six.CZPTening parts:  12.9 high-strength screws
seven.Voltage: 380V(Others are optional)
eight.Frequency: 50Hz(Others are optional)

Application fields

CZPTmer CZPT(movie, pipe, plate, sheet, granulation )
Substantial Temperature or Large Viscosity CZPT (Computer, PMMA, Ab muscles, HIPS, PET, PVB, PS, PP, PA, PE, PVA)
CZPT Fiber CZPT (polyester for cotton-fiber, polypropylene )
Other CZPTmer CZPT CZPT (rubber, asphalt, paint, adhesives, coatings, lubricants)

Model of 
Gear pump

Quantity
(cc)
output
(kg/h)
Heatingpower
(kw)
Driving power
(kw)
Outlet  pressure
(Mpa)
Functioning
Temperature
(ºC)
GM-30 thirty thirty-a hundred and fifty 3 3 ≤35 ≤350
GM-50 50 50-280 4 5.five ≤35 ≤350
GM-one hundred 100 100-five hundred five 7.five ≤35 ≤350
GM-one hundred fifty a hundred and fifty 200-900 6 11 ≤35 ≤350
GM-250 250 300-1200 eight eighteen.5 ≤35 ≤350
GM-four hundred four hundred 400-1600 nine.5 22 ≤35 ≤350
GM-five hundred 500 500-2000 twelve 30 ≤35 ≤350
 Inlet pressure (Mpa) ≥1.0                  cleaning Temperature (ºC) ≤400

High Pressure Polymer Melt Gear Pump for Extrusion Line