Meltblown Nonwoven Fabric Making Machine Manufacturer

Meltblown Nonwoven Fabric Making Machine Manufacturer

BFE99 PP CZPTblown Nonwoven Cloth Generating CZPT Creation Line for healthcare use
Excellent top quality meltblown nonwoven fabric creating device 800mm 600kg/working day

HangZhou Ningwei CZPT and CZPT Co., Ltd. is a factory focused to investigation and producing PP meltblown nonwoven fabric manufacturing line. Our company has obtained CE certification and SGS certification.

Characteristics of MY-880 meltblown nonwoven equipment:

one. Quite hassle-free to put in and work. The generation line does not require complicated installation approach, only requirements straightforward assembly to use.

2.Increased creation ability. The product is able to get 600kg/day creation capability stably.

three. Increased output quality. The meltblown cloth created by this machine is in full compliance with China’s N95 generation CZPT, it can make cloth up to BFE95 and BFE99.

4. This model is created from our third-technology product, has been examined and approved by several domestic and international consumers.

Introduction to the structure of the creation line

Completely automated feeding→melt metering pump→melt filtration→spray plate assembly→receiving network→electrostatic electret 1→electrostatic electret 2→ online slitting → online winding

Manufacturing process demonstration

CZPTpropylene pellet feedstocks are divided into one particular-element and two-part.

A. Single-element raw resources are uncooked supplies without having incorporating any additives.
B. Two-element feedstock divided into polypropylene (pp) pellets + electret masterbatch

The principal function of the electret masterbatch is to concentrate and keep static electrical energy to obtain the absorption of fantastic dust particles.
 The heating part of the machine is: extrusion system, soften metering pump, soften nozzle and very hot air compressed air.
 This device have to be operated by a professional captain, non-captain make sure you do not start off the device, to ensure secure manufacturing.

Specification of the production line

Dimensions 10.6m L* 2m W*two.8m H   Conveyor speed 4-20m/min
Fat About one.five tons Operator need to have two / set
Power 380VAC Successful width 800mm
Electrical power charge 180kW Fat variety 15-80g /m2
Manufacturing capacity 500kg-600kg / day BFE level of cloth ≥95%

CZPTmer Feeding

The equipment is geared up with an automatic vacuum suction and feeding unit, the polymer is generally created into tiny spherical and granular slices, the vacuum is opened, the content can be fed into the extruder equipped hopper. If the materials in the hopper is reduced, fill the hopper immediately, or else the substance will be broken and the meltblown fabric will ultimately turn into thin or not mesh.

CZPT extrusion

In the feed conclude of the screw extruder, the polymer slices and additives and other required uncooked components, following full mixing into the screw extruder, heating into a melt, spend consideration to the heating temperature need to be modified in accordance to the characteristics of the uncooked supplies, can be set in accordance to the parameters recommended by the producers, or can be modified in accordance to the actual manufacturing needs, so that the concluded item can meet the specifications of use.

Fibre development

The filtered thoroughly clean soften need to pass by means of the filter display screen, and then evenly fed into the spinneret, so that the extrusion quantity of every spinneret gap is the identical, if the volume of spout is considerably decreased or can not achieve the normal extrusion quantity, it is needed to stop and verify whether or not there is a fault, check out whether the filter monitor is blocked or not, and instantly get rid of the difficulty so as not to injury the extrusion tools. When removing the difficulty of the extruder, you can examine the filter plate of the spinneret, you can observe no matter whether the holes on the filter plate can not stream properly the soften of debris there. The fibers are extruded by side winds that pull the melt out of the spinneret holes and then cooled to sort fibers.

CZPTtrostatic discharge

PM2.5 particles are isolated in two methods: mechanical blocking and electrostatic adsorption. Between them, mechanical blocking is the use of mask fiber filtration materials its very own modest pore room to block the invasion of bacteria and viruses, this mechanical blocking impact on the particle dimension of much less than 1μm particles filtering impact is quite very poor, can not enjoy a purifying role. As a result, improving the filtration effectiveness of the mask meltblown filter media can be attained by escalating the electrostatic adsorption capability of the mask. To increase the electrostatic adsorption ability of the mask, meltblown nonwoven filter material is essential for electropole treatment method. The electret therapy will carry a large amount of electrostatic demand to the fiber surface, using electrostatic adsorption to capture good particles, can boost the filtration efficiency, and does not enhance breathing resistance.

Slitting and winding

At the conclude of the line there is winding tools. Lower and wind the shaped meltblown nonwoven fabric to the size necessary for packaging. The winding has a tension control gadget that retains the winding in a stable condition at all occasions. The length between the cutters is the width of the nonwoven fabric. The distance amongst the cutters can be altered in accordance to the creation wants and the variety of cutters can be organized.

Feel totally free to make contact with us please if you need a lot more info or have any questions.

 
 
 
 

 

Meltblown Nonwoven Fabric Making Machine Manufacturer