Multi Spindle Wood Carving CNC Router

Multi Spindle Wood Carving CNC Router

multi spindle wood carving cnc router

 

       1325 three spindles Asynchronous machining cnc router with 3 heads (Not simultaneous). The heads can use a few different tools, which can complete a few distinct processing designs at the exact same time. Particular vacuum method with vacuum desk with mobile suction block, vacuum pump and tubes. The height of the bridge can be increased at request (200 mm) as effectively as a larger table width to make sure that the operating location is effective on every spindle. Unbiased electrical control box, with the perfect wiring and free of charge shifting pulleys. Flat bed structured with metal tubes, company and durable, does not deform. High precision ball screw. CZPT ZheJiang Rail straight square manual. To ensure that the machine is doing work at higher velocity and performance. The table has locating rods, to correct the work piece very easily.

 

 

    edge

    Its benefit is that this device is sturdy and has large processing precision. The gantry is welded by a thick seamless metal structure it is taken care of by substantial-temperature tempering and vibration pressure reduction (VSR) to reduce residual anxiety make certain very good steadiness and not straightforward to deform. hefty-obligation equipment mattress. Heated with 650 levels temperature remedy and will not be deformed for twenty several years and guarantee stale moving. Welded metal T sort composition as a entire,six-legged large-duty physique, large bearing capability with vibration Temper aging treatment assures no deformation for a prolonged time, avoid the broken knife, more steady, tough.

    Configuration
     

    Model K45MT-DY
    XYZ operating location one,three hundred x two,five hundred x 200mm
    XY motion Rack and pinion, gear generate/ZheJiang
    Z motion Ball screw push/Germany
    Repositioning resolution .02mm
    Xihu (West Lake) Dis. Linear 20 sq./ZheJiang
    Max. velocity 35,000mm/min
    Max. slicing velocity 25,000mm/min
    Table T-slot vacuum table
    Spindle one & 2 & three four.5kw Chinese air cooling spindles
    Spindles speed 18,000rpm
    CZPT five.5kw Inovance
    Motor and driver Stepper motor
    Handle Method DSP B15
    Doing work voltage AC380V/fifty-60Hz, 3-section
    Software Artcam & Alphacam
    Command Code G code
    Oli lubrication Handbook
    Device Sensor CZPT

     

    ball screw ZheJiang TBI

      (TBI, ZheJiang ) generate C5 class ball screw,

      precision is significantly less than .03mm,Ball screw has dust prove system on the two finishes and the two Levels, may completely isolate dust, and then lengthen existence.

                          

    DSP B15 Handheld controller

     New three-axis linkage movement manner to achieve comprehensive managing

     Support travel and spindle error alarm operate

     Large storage room, ideal U disk compatibility, fast studying speed, secure and dependable U disk-processing.

     Support smart file examining purpose.

                          

         

    Oil lubrication method

    a central oiler

     Note:It is advised that a single pump of the oiler as soon as a month will be sufficient to preserve your equipment lubricated.

     When the oil tank needs filling,best up with a good good quality

     SAE 30 excess weight oil.

         

    Vacuum Desk T-Slots

    The vacuum table has T-slot mounting products incorporated into the tables to permit fixtures and material blanks to be clamped straight to the desk. Clamps are offered.

    four.5kw air cooling spindle

    18000rpm

    Software: Milling,Engraving,Drilling

    Every spindle motor have to be passed sharpening approach, Improve spindle concentricity to improve motor functioning life.

            

    vacuum pump seven.5kw-selection

    No oily odors.,Reduced sound and libration,Servicing-free of charge.

    Higher force and low sounds

    Max  dutput480³/h

    Max strain -440/500mba

    velocity 28000rpm

                          
     

    our provider

    package deal

    1.Complete movie packaging machine 
    2.Anti-collision deal edge
    three.Fumigation-totally free plywood wooden box with iron binding belt
    4.According to customer’s needs for loading the whole container or LCL at HangZhou port.

    business info

     

    Multi Spindle Wood Carving CNC Router

    Tags: