Sp75-180 PVC Cable Grade Material Plastic Compounding Machine

Sp75-180 PVC Cable Grade Material Plastic Compounding Machine

The traits
1.The first phase is SHJ twin screw extruder without having die.By way of the mixture of barrel and screw, the extruder can exert  its sturdy capability to make the thermo sensibility material like PVC melting, compounding,dispersing and decentralizing under the problem of no again force
2.The CZPT phase is SJ solitary screw extruder.Simply because of the reduce rotating velocity, it can total melting,compounding lengthways and forming srands steadily, avioding more than heating.
     
CZPT info:

Model   CZPT diameter L/D Rotary rate Motor electricity Output
SP50-a hundred and twenty TSE-fifty fifty.5mm 24-48 500r/min 37-45kw 200-350kg/h
SJ120 120mm 7-20 sixty five-85r/min thirty-37kw
SP65-150 TSE-sixty five 62.4mm 24-48 four hundred-500r/min fifty five-75kw 350-550kg/h
SJ150 150mm seven-twenty sixty five-85r/min 37-45kw
SP75-180 TSE-75 71mm 24-48 400-500r/min 90-110kw 500-650kg/h
SJ180 180mm seven-20 65-85r/min forty five-55kw
SP95-200 TSE-ninety five 93mm 24-48 300r/min 160-220kw 500-1000kg/h
SJ200 200mm seven-twenty 85r/min 90-110kw

 
Two stage air cooling extruders

Attributes:
Merge the substantial pace and in depth mixing of processing and the low velocity, low temperature, and lower shear of one screw processing
Best for compounding of heat and shear-sensitive resources.
 
Software:
PVC compounds for cable, shoe sole, transparent container, and medical apps EVA shield cable compounds
CZPT black learn batches of PE, EVA, and so forth.

In depth data for SP75-a hundred and eighty:
 
1.Main extruder:TSE-seventy five/500-a hundred and ten–32
one) CZPT diameter: 71mm. L/D = 32
two) Main drive motor: AC 110Kw, Speed regulated by ABB transducer imported   from Switzerland.  
3) CZPT rotary speed: 50~500rpm
4) The barrels are equipped with bimetallic liners (45#metal+α101), processing heat treatment. HRC=sixty~sixty two. The material of screw elements is high-speed steel 38CrMoAlA, nitrogen treatment. HRC=fifty eight~60.
5).The 1st barrel is the main feeding vent, the 6th is for degassing,  9th is vacuum section , and the others are closed barrels.
6)Casting copper heaters for 2-3th barrels. The others are equipped with casting  aluminum heaters. All heating power: ~50kw.
The extruder figure:
Feeding                                           Vacuum 

one two 3 four five six seven 8 CZPT screen changer
 die section

7) Reducing and distributing gearbox:
  The gearbox reduces the motor speed to the speed of the screw shafts and distributes it to the two output shafts. This gearbox output torque can reach     4.8T/A3
    The gearbox consists of:
l Involute gear teeth couplings between the output shafts and screw shafts
l Integrated thrust bearing assembly, radial bearings of the output axis are NSK products 
l Bottom part of casing designed as oil sum
8) Soft water cools the barrels with condenser.
      Material of input and output pipes is stainless steel. 
      Solenoid valve: imported products. 
      Manual valve: stainless steel. 
      The water pump motor in the soft water system is 0.55kw. 
      The soft water is distilled water.
2.Single extruder SJ-180/85-90-22
one)180mm L/D = 28, rotary speed is 6~65rpm.
2)Main drive motor: AC 90Kw. ABB transducer,.
3)The material of barrels and shafts is nitride steel (38CrMoAlA).
4)Water-cooling inside the core of shafts.
5)Casting aluminum heaters, All heating power: ~36kw
6Enlarged screen changer  , material through 72 hours’ nitrogen treatment . The channel is short, with little melt left and easy to clean.
7)Tailor-made flange:connect the single and twin screw extruder.

Certification: 

 

Sp75-180 PVC Cable Grade Material Plastic Compounding Machine